Precautions for maintenance of Jiangsu Tianling constant temperature shaker

Issue date:2022/03/08    Views：14    Classification：Industry information

01. During continuous operation of the constant temperature shaking table, regular inspection should be carried out every three months: check whether there are water drops, dirt, etc. falling on the motor and control elements; Clean the dust on the axial flow fan; Check the fuse, control element and fastening screw.

02. After long-term use, natural wear of the constant temperature shaker is normal. After using the constant temperature shaker for one year, if it is found that the motor has abnormal noise, the heating system is abnormal, the bearing of the transmission part is worn, the heating constant temperature is abnormal, the belt is loose or cracked, the electronic control element is invalid... And other faults, the enterprise will continue to provide high-quality services and assist in handling them.

03. Correctly use and pay attention to the maintenance of the constant temperature shaker to keep it in good working condition, which can prolong the service life of the constant temperature shaker.

04. The bearing of the oscillator transmission part has been filled with an appropriate amount of grease (No. 1 calcium sodium base) before leaving the factory. During the continuous operation of the constant temperature shaker, the grease should be filled every six months, and the filling amount accounts for about 1/3 of the bearing space.